• Cone Crusher
• Crushers
• Equipment
• Projects
• News
• Service
• Contact Us

The information you have to notice when you install Jaw Crusher

Source: www.crusher-supplier.com    Contact Us    Welcome to Message Us !

Zhengzhou Yifan Machinery Co.,Ltd. is a professional mining machinery company. Jaw crusher is our key crushing equipment. Jaw Crusher is the first crushing equipment and the most commonly used crushing equipment. In the entire process, jaw crusher plays an important role. Other equipment is the mechanical equipment to assist jaw crusher. So the installation of jaw crusher is very important, which should meet with other machinery, and that location should be selected.

      1. jaw crusher needs to be installed in the shelter of the place, not open place.
      2. the motor should be installed in the rear of jaw crusher, rotation must be done according to requirements, not the reverse
      3. Machines should be firmly set in concrete on the ground, leaving a reasonable row mine shafts, and the slope is not less than 50 degrees. At the important time, the slope should decided by the user according to feeder and transfer equipments.
      4. Entrance and exit in the adjustment of school, should release the tension spring, to be adjust, the adjustment of the spring at the appropriate level of tension, the tension spring to be able to lower the noise between brackets and bracket pad bracket and bracket will not slides out.
      5. The match and management of Jaw crusher and other equipment help the production, assembly line work and ensure the face not congestion.
      6. In order to facilitate the transport of finished materials, the discharge opening should adopt the mechanized transport equipment.
      7. Tighten the screws and pre-test connection parts, check lubrication before working.
      8. First use of human moving pulley, unimpeded movement recognized when the test can be carried in two hours, during the two hours, no impact, no noise, no sealing, no oil spills and the pulley shaft between the loose swing and so on. Bearing temperature no more than 35 degrees, if found the above faults, you must be immediately checked.
      9. User load test required 10 hours, and use hard mineral. If no fault and bearing temperature is less than 70 degrees, the machine can be put into production.

The above information is prepared and provided by Zhengzhou Yifan Machinery Co.,Ltd. For the latest information and more parameters, please contact us. The company can also design and produce equipments according to customers’ demands. Choosing Yifan jaw crusher means choosing the high efficiency and profit. 

 

Favorites / Print / Top / Go Back